Variable displacement axial piston pumps swash plate design.

PLATA pumps are ideally suited for medium and high pressure open circuit applications.

Displacements from 1.75 in³/rev (28,7 cm³/rev) to 5.36 in³/rev (87,9 cm³/rev)
Max. peak pressure up to 5075 psi (350 bar)
Max. speed up to 3000 min^-1

• Energy saving
• Low noise emission
• Short response time
• Drive shaft bearing suitable for radial and axial loads
• Multiple combinations

Controls

• Pressure compensator
• Flow and pressure compensator (Load Sensing)
• Torque limiter
• Electrohydraulics servocontrols

Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications. 

MVP

The compact design allows to be mounted directly on engine motors.

MVPD

The new "MVPD" series allow higher flow rates than traditional pumps with the same dimension, higher machine speeds without affecting the design of the hydraulic system and a high power-to-dimension ratio.

MVPR

“MVPR” series piston pump is an evolution of MVP series with higher pressure designed for hoist applications such as truck crane and telehandler for building & construction.A careful analysis of the application working cycle will ensure a long service life of the pump.

Displacements from 0.85 in³/rev (14 cm³/rev)  to  5.17 in³/rev (84.7 cm³/rev).

Max. peak pressure up to 5800 psi  (400 bar).
Max. speed up to 3500 min^-1

• Exceptional working life expectancy.
• Low noise emission.
• Drive shaft bearing suitable for radial and axial loads.
• Multiple combinations.
• Short response time.

Controls

• Min. and max. displacement limiter.
• Pressure compensator.
• Flow and pressure compensator (Load-Sensing).
• Torque limiter.
• Electronic controls

Catalogues

Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications.  

MVPe series piston pump is an evolution of the MVP series and represents the integration in one object of:

• MVP series piston pump 
• Angular sensor 
• Pressure electronic compensator 
• Electronic control unit

Displacements from 2.13 in³/rev (34,9 cm³/rev) to 5.17 in³/rev (84,7 cm³/rev).
Displacements from 0.85 in³/rev (14 cm³/rev) to 2.12 in³/rev (34,8 cm³/rev). available soon
Max. peak pressure up to 5075 psi (350 bar).
Max speed up to 3000 min^‑1

• Machine lay-out simplification 
• 2 Different Software: Smart Easy and Smart Full Software 

Controls

• Min. and max. displacement limiter
• Pressure electronic compensator
• Flow compensator (Load-Sensing)

Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications.

The compact design allows to be mounted directly on the PTOs.

Displacements from 3.66 in³/rev (60 cm³/rev) to 5.17 in³/rev (84,7 cm³/rev). 
Max. peak pressure up to 5800 psi (400 bar). 
Max. speed up to 3000 min^-1

• Pump internal drain line
• Compensators external drain line
• Direct mounting on the PTOs
• Body width 4.8898 in (124,2 mm)
• Compact design
• Low noise emission

Controls

• Min. and max. displacement limiter
• Flow and pressure compensator (Load-Sensing)
• Electro-proportional pressure compensator